Are We Creating An Insecure Internet of Things (IoT)? Security Challenges and Concerns

The Internet of Things (IoT) has been an industry buzzword for years, but sluggish development and limited commercialization have led some industry watchers to start calling it the Internet of NoThings.

Double puns aside, IoT development is in trouble. Aside from spawning geeky jokes unfit for most social occasions, the hype did not help; and, in fact, I believe it actually caused a lot more harm than good. There are a few problems with IoT, but all the positive coverage and baseless hype are one we could do without. The upside of generating more attention is clear: more investment, more VC funding, more consumer interest.

However, these come with an added level of scrutiny, which has made a number of shortcomings painfully obvious. After a couple of years of bullish forecasts and big promises, IoT security seems to be the biggest concern. The first few weeks of 2015 were not kind to this emerging industry, and most of the negative press revolved around security.

Was it justified? Was it just fear, uncertainty and doubt (FUD), brought about by years of hype? It was a bit of both; although some issues may have been overblown, the problems are very real, indeed.

From Year Of IoT To Annus Horribilis For IoT

Many commentators described 2015 as the year of IoT, but so far, it has been a year of bad press. Granted, there are still ten months to go, but negative reports keep piling on. Security firm Kaspersky recently ran a damning critique of IoT security challenges, with an unflattering headline, Internet of Crappy Things.

Kaspersky is no stranger to IoT criticism and controversy; the firm has been sounding alarm bells for a while, backing them up with examples of hacked smart homes, carwashes and even police surveillance systems. Whether a hacker wants to wash their ride free of charge, or stalk someone using their fitness tracker IoT security flaws could make it possible.

Wind River published a white paper on IoT security in January 2015, and the report starts off with a sobering introduction. Titled Searching For The Silver Bullet, it summarizes the problem in just three paragraphs, which I will condense into a few points:

• Security must be the foundational enabler for IoT.
• There is currently no consensus on how to implement security in IoT on the device.
• A prevalent, and unrealistic, expectation is that it is somehow possible to compress 25 years of security evolution into novel IoT devices.
• There is no silver bullet that can effectively mitigate the threats.

However, there is some good news; the knowledge and experience are already here, but they have to be adapted to fit the unique constraints of IoT devices.

Unfortunately, this is where we as system security developers stumble upon another problem, a hardware problem.

U.S. Federal Trade Commission chairwoman, Edith Ramirez, addressed the Consumer Electronics Show in Las Vegas earlier this year, warning that embedding sensors into everyday devices, and letting them record what we do, could pose a massive security risk.

Ramirez outlined three key challenges for the future of IoT:

• Ubiquitous data collection.
• Potential for unexpected uses of consumer data.
• Heightened security risks.

She urged companies to enhance privacy and built secure IoT devices by adopting a security-focused approach, reducing the amount of data collected by IoT devices, and increasing transparency and providing consumers with a choice to opt-out of data collection.

Ramirez went on to say that developers of IoT devices have not spent time thinking about how to secure their devices and services from cyber attacks.

The small size and limited processing power of many connected devices could inhibit encryption and other robust security measures, said Ramirez. Moreover, some connected devices are low-cost and essentially disposable. If a vulnerability is discovered on that type of device, it may be difficult to update the software or apply a patch or even to get news of a fix to consumers.

While Ramirez is spot on in most respects, I should note that the Internet went through a similar phase two decades ago. There were a lot of security concerns, and the nineties saw the emergence of the internet-borne malware, DDoS attacks, sophisticated phishing and more. Even though Hollywood depicted a dystopian future in some films, we have ended up with kittens on social networks and a high-profile security breach here and there.

The Internet is still not secure, so we cant expect IoT to be secure, either. However, security is constantly evolving to meet new challenges, weve seen it before, and well see it again, with IoT and subsequent connected technologies.

IoT Hardware Is And Will Remain A Problem

Some of you will be thinking that the hardware issues mentioned by the FTC boss will be addressed; yes, some of them probably will.

As the IoT market grows, we will see more investment, and as hardware matures, we will get improved security. Chipmakers like Intel and ARM will be keen to offer better security with each new generation, since security could be a market differentiator, allowing them to grab more design wins and gain a bigger share.

Technology always advances, so why not? New manufacturing processes generally result in faster and more efficient processors, and sooner or later, the gap will close, thus providing developers with enough processing power to implement better security features. However, I am not so sure this is a realistic scenario.

First of all IoT chips wont be big money-makers since they are tiny and usually based on outdated architectures. For example, the first-generation Intel Edison platform is based on Quark processors, which essentially use the same CPU instruction set and much of the design of the ancient Pentium P54C. However, the next-generation Edison microcomputer is based on a much faster processor, based on Atom Silvermont cores, which is in many Windows and Android tablets, today (Intel shipped ~46m Bay Trail SoCs in 2014).

On the face of it, we could end up with relatively modern 64-bit x86 CPU cores in IoT devices, but they wont come cheap, they will still be substantially more complex than the smallest ARM cores, and therefore will need more battery power.

Cheap and disposable wearables, which appear to be the FTCs biggest concern, wont be powered by such chips, at least, not anytime soon. Consumers may end up with more powerful processors, such as Intel Atoms or ARMv8 chips, in some smart products, like smart refrigerators or washing machines with touchscreens, but they are impractical for disposable devices with no displays and with limited battery capacity.

Selling complete platforms, or reference designs for various IoT devices, could help chipmakers generate more revenue, while at the same time introduce more standardisation and security. The last thing the industry needs is more unstandardized devices and more fragmentation. This may sound like a logical and sound approach, since developers would end up with fewer platforms and more resources would be allocated for security, however, security breaches would also affect a bigger number of devices.

Money Is Pouring In, Analysts Remain Bullish, What Could Possibly Go Wrong?

One of the most common ways of tackling any problem in the tech industry is to simply throw money at it. So, lets see where we stand right now in terms of funding rather than technology.

According to research firms IDC and Gartner, IoT will grow to such an extent that it will transform the data centre industry by the end of the decade. Gartner expects the IoT market will have 26 billion installed units by 2020, creating huge opportunities for all parties, from data centres and hardware makers, to developers and designers. IDC also expects the IoT industry to end up with billions of devices and trillions of dollars by the end of the decade.

Gartners latest comprehensive IoT forecast was published in May 2014 and it also includes a list of potential challenges, some of which Ive already covered:

• Security: Increased automation and digitization creates new security concerns.
• Enterprise: Security issues could pose safety risks.
• Consumer Privacy: Potential of privacy breaches.
• Data: Lots of data will be generated, both for big data and personal data.
• Storage Management: Industry needs to figure out what to do with the data in a cost-effective manner.
• Server Technologies: More investment in servers will be necessary.
• Data Centre Network: WAN links are optimised for human interface applications, IoT is expected to dramatically change patterns by transmitting data automatically.

All these points (and more) must be addressed sooner or later, often at a substantial cost. We are no longer talking about tiny IoT chips and cheap toys based on such chips, this is infrastructure. This is a lot of silicon in server CPUs, expensive DDR4 ECC RAM and even bigger SSDs, all housed in expensive servers, in even bigger data centres.

Thats just the tip of the iceberg; industry must tackle bandwidth concerns, data management and privacy policies, and security. So how much money does that leave for security, which is on top of Gartners list of IoT challenges?

A lot of money is already pouring into the industry, VCs are getting on board and the pace of investment appears to be picking up. There were also a number of acquisitions, often involving big players like Google, Qualcomm, Samsung, Gemalto, Intel and others. There is a list of IoT-related investments on Postscapes. The trouble with many of these investments, especially those coming from VCs, is that they tend to focus on shiny things, devices that can be marketed soon, with a potentially spectacular ROI. These investments dont do much for security or infrastructure, which would basically have to trail IoT demand.

Big players will have to do the heavy lifting, not VC-backed startups and toymakers. Agile and innovative startups will certainly play a big role by boosting adoption and creating demand, but they cant do everything.

So lets think of it this way, even a small company can build a car, or tens of thousands of cars, but it cant build highways, roads, petrol stations and refineries. That same small company can build a safe vehicle using off-the-shelf technology to meet basic road safety standards, but it couldnt build a Segway-like vehicle that would meet the same safety standards, nor could anyone else. Automotive safety standards could never apply to such vehicles, we dont see people commuting to work on Segways, so we cannot expect the traditional tech security standard to apply to underpowered IoT devices, either.

Having commuters checking their email or playing Candy Crush while riding their Segways through rush hour traffic does not sound very safe, does it? So why should we expect IoT devices to be as safe as other connected devices, with vastly more powerful hardware and mature operating systems? It may be a strange analogy, but the bottom line is that IoT devices cannot be expected to conform to the same security standards as fully fledged computers.

But Wait, There Werent That Many IoT Security Debacles

True, we dont see a lot of headlines about spectacular IoT security breaches, but let me put it this way: how many security related headlines did you see about Android Wear? One? Two? None? It is estimated there are fewer than a million Android Wear devices in the wild, so theyre simply not a prime target for hackers, or a subject for security researchers.

How many IoT devices do you own and use right now? How many does your business use? Thats where the Internet of NoThings joke comes from, most people dont have any. The numbers keep going up, but the average consumer is not buying many, so where is that growth coming from? IoT devices are out there and the numbers are booming, driven by enterprise rather than the consumer market.

Verizon and ABI Research estimate that there were 1.2 billion different devices connected to the internet last year, but by 2020, they expect as many as 5.4 billion B2B IoT connections.

Smart wristbands, toasters and dog collars arent a huge concern from a security perspective, but Verizons latest IoT report focuses on something a bit more interesting: enterprise.

The number of Verizons machine-to-machine (M2M) connections in the manufacturing sector increased by 204 percent from 2013 to 2014, followed by finance and insurance, media and entertainment, healthcare, retail and transportation. The Verizon report includes a breakdown of IoT trends in various industries, so it offers insight into the business side of things.

The overall tone of the report is upbeat, but it also lists a number of security concerns. Verizon describes security breaches in the energy industry as unthinkable, describes IoT security as paramount in manufacturing, and lets not even bring up potential risks in healthcare and transportation.

How And When Will We Get A Secure Internet of Things?

I will not try to offer a definitive answer on how IoT security challenges can be resolved, or when. The industry is still searching for answers and there is a long way to go. Recent studies indicate that the majority of currently available IoT devices have security vulnerabilities. HP found that as many 70 percent of IoT devices are vulnerable to attack.

While growth offers a lot of opportunities, IoT is still not mature, or secure. Adding millions of new devices, hardware endpoints, billions of lines of code, along with more infrastructure to cope with the load, creates a vast set of challenges, unmatched by anything we have experienced over the past two decades.

That is why I am not an optimist.

I dont believe the industry can apply a lot of security lessons to IoT, at least not quickly enough, not over the next couple of years. In my mind, the Internet analogy is a fallacy, simply because the internet of the nineties did not have to deal with such vastly different types of hardware. Using encryption and wasting clock cycles on security is not a problem on big x86 CPUs or ARM SoCs, but it wont work the same way with tiny IoT devices with a fraction of the processing power and a much different power consumption envelope.

More elaborate processors, with a biger die, need bigger packaging and have to dissipate more heat. They also need more power, which means bigger, heavier, more expensive batteries. To shave off weight and reduce bulk, manufacturers would have to resort to using exotic materials and production techniques. All of the above would entail more R&D spending, longer time-to-market and a bigger bill of materials. With substantially higher prices and a premium build, such devices could hardly be considered disposable.

So what has to be done to make IoT secure? A lot. And everyone has a role to play, from tech giants to individual developers.

Lets take a look at a few basic points, such as what can be done, and what is being done, to improve IoT security now:

• Emphasise security from day one
• Lifecycle, future-proofing, updates
• Access control and device authentication
• Know your enemy
• Prepare for security breaches

A clear emphasis on security from day one is always a good thing, especially when dealing with immature technologies and underdeveloped markets. If you are planning to develop your own IoT infrastructure, or deploy an existing solution, do your research and stay as informed as possible. This may involve trade-offs, as you could be presented with a choice of boosting security at the cost of compromising the user experience, but its worth it as long as you strike the right balance. This cannot be done on the fly, you have to plan ahead, and plan well.

In the rush to bring new products and services to market, many companies are likely to overlook long-term support. It happens all the time, even in the big leagues, so we always end up with millions of unpatched and insecure computers and mobile devices. They are simply too old for most companies to bother with, and it is bound to be even worse with disposable IoT devices. Major phone vendors dont update their software on 2-3 year old phones, so imagine what will happen with $20 IoT devices that might be on your network for years. Planned obsolescence may be a part of it, but the truth is that updating old devices does not make much financial sense for the manufacturer since they have better things to do with their resources. Secure IoT devices would either have to be secure by design and impervious from the start, or receive vital updates throughout their lifecycle, and Im sure you will agree neither option sounds realistic, at least, not yet.

Implementing secure access control and device authentication sounds like an obvious thing to bring up, but we are not dealing with your average connected device here. Creating access controls, and authentication methods, that can be implemented on cheap and compact IoT devices without compromising the user experience, or adding unnecessary hardware, is harder than it seems. As I mentioned earlier, lack of processing power is another problem, as most advanced encryption techniques simply wouldnt work very well, if at all. In a previous post, I looked at one alternative, outsourcing encryption via the blockchain technology; I am not referring to the Bitcoin blockchain, but similar crypto technologies that are already being studied by several industry leaders.

Si vis pacem, para bellum if you want peace, prepare for war. It is vital to study threats and potential attackers before tackling IoT security. The threat level is not the same for all devices and there are countless considerations to take into account; would someone rather hack your daughters teddy bear, or something a bit more serious? Its necessary to reduce data risk, keep as much personal data as possible from IoT devices, properly secure necessary data transfers, and so on. However, to do all this, you first need to study the threat.

If all else fails, at least be prepared for potential security breaches. Sooner or later they will happen, to you or someone else (well, preferably a competitor). Always have an exit strategy, a way of securing as much data as possible and rendering compromised data useless without wrecking your IoT infrastructure. It is also necessary to educate customers, employees and everyone else involved in the process about the risks of such breaches. Instruct them in what to do in case of a breach, and what to do to avoid one.

Of course, a good disclaimer and TOS will also help if you end up dealing with the worst-case scenario.

This article originally appeared on Toptal.